How to Change Cabin Air Filter in a 2018 Ford Explorer
Keeping your car’s cabin air filter clean is essential for maintaining a healthy and comfortable driving environment. The cabin air filter in your 2018 Ford Explorer helps to remove dust, pollen, and other contaminants from the air before it enters the cabin. Over time, this filter can become clogged, reducing its effectiveness and potentially causing unpleasant odors. In this article, we will guide you through the process of changing the cabin air filter in your 2018 Ford Explorer, ensuring your vehicle remains a pleasant place to be.
Before you begin, gather the following tools and materials:
- Replacement cabin air filter (you can find the correct filter for your 2018 Ford Explorer by consulting your vehicle’s manual or visiting an authorized Ford dealer)
- Newspaper or a rag to protect the interior
- Socket set (if necessary)
- Wrench (if necessary)
Step 1: Locate the Cabin Air Filter
First, you need to locate the cabin air filter in your 2018 Ford Explorer. The filter is typically located behind the glove box or in the engine compartment. Refer to your vehicle’s manual for the exact location, as it may vary depending on the model and year.
Step 2: Remove the Glove Box or Access Panel
If the filter is behind the glove box, you will need to remove it. This is usually done by releasing the clips or latches that hold the glove box in place. Set the glove box aside, and place a piece of newspaper or a rag underneath to protect the interior from any debris that may fall out.
Step 3: Remove the Old Cabin Air Filter
Once you have access to the filter, you can remove it. In some cases, the filter may be held in place by clips or a retaining clip. If this is the case, simply release the clip and pull the filter out. If the filter is secured by a screw, use a socket set and wrench to remove the screw and then pull the filter out.
Step 4: Install the New Cabin Air Filter
Now that the old filter is out, take the new filter and insert it into the same location. Ensure that it is properly seated and that it is oriented correctly. If the filter is held in place by clips or a retaining clip, make sure to engage the clip. If it is secured by a screw, reinsert the screw and tighten it securely.
Step 5: Reassemble the Glove Box or Access Panel
With the new filter installed, you can now reassemble the glove box or access panel. If you removed the glove box, make sure it is properly aligned and that all clips or latches are engaged. Replace any trim pieces that were removed, and clean up any debris that may have fallen out.
Step 6: Test the New Cabin Air Filter
Before you finish, it’s a good idea to test the new cabin air filter. Turn on the vehicle and set the fan to a high speed. The air should be cool and free of any odors. If you notice any issues, double-check that the filter is properly installed and that there are no obstructions in the airflow.
By following these steps, you can easily change the cabin air filter in your 2018 Ford Explorer. Regularly replacing the filter will help ensure a clean, comfortable driving environment for you and your passengers.
