How to Put Windshield Wipers on Ford Explorer
Installing windshield wipers on a Ford Explorer is a straightforward process that can be completed in just a few steps. Whether you are replacing worn-out wipers or installing new ones, following these instructions will help ensure a proper fit and smooth operation. Here’s a step-by-step guide on how to put windshield wipers on your Ford Explorer.
1. Gather the Necessary Tools
Before beginning the installation, gather the following tools: a flat-head screwdriver, a socket set (if needed), and the new windshield wipers. Ensure that the new wipers are compatible with your Ford Explorer model and year.
2. Open the Hood
First, locate the hood release lever inside your Ford Explorer, which is typically located on the driver’s side. Pull the lever towards you to release the hood. Then, lift the hood and secure it in place using the support rods.
3. Locate the Wiper Arm
Inside the engine compartment, you will find the wiper arm attached to the windshield. The wiper arm is the part that holds the windshield wiper blades and moves them across the windshield.
4. Remove the Wiper Arm
Using the flat-head screwdriver, carefully remove the bolt that holds the wiper arm in place. This bolt is usually located at the base of the wiper arm, near the windshield. Once the bolt is loose, gently pull the wiper arm away from the windshield.
5. Install the New Wiper Arm
Attach the new wiper arm to the mounting bracket on the windshield. Make sure that the wiper arm is properly aligned with the mounting bracket and secure it in place by tightening the bolt.
6. Attach the Wiper Blades
Place the new wiper blades onto the wiper arm. Ensure that the blades are properly aligned with the arm and that they fit securely into place. The blades may have a locking mechanism that needs to be engaged to keep them in place.
7. Test the Wipers
After installing the new wiper blades, lower the hood and turn on your Ford Explorer. Activate the windshield wipers to ensure that they are functioning properly and that there are no gaps or uneven movement.
8. Clean the Windshield
If necessary, clean the windshield to remove any debris or dirt that may have accumulated. This will help ensure that the new wipers perform as intended.
9. Finalize the Installation
Congratulations! You have successfully installed the new windshield wipers on your Ford Explorer. Take a moment to enjoy the smooth operation of your new wipers and the improved visibility they provide during wet weather conditions.
