How many quarts does a 2017 Ford Explorer take? This is a common question among Ford Explorer owners and potential buyers. The answer to this question is crucial for maintaining the vehicle’s performance and ensuring it runs smoothly. In this article, we will discuss the engine oil capacity for a 2017 Ford Explorer and provide some tips on how to change the oil to keep your vehicle in top condition.
The 2017 Ford Explorer comes with a 3.5-liter EcoBoost V6 engine, which is known for its power and efficiency. When it comes to engine oil, the capacity for this engine is approximately 5.7 quarts (5.4 liters). This includes the oil that is already in the engine when you purchase the vehicle and the amount you will need to add during the first oil change.
It is essential to use the correct type of oil for your 2017 Ford Explorer. The recommended oil for this vehicle is synthetic oil with a viscosity of 5W-30 or 5W-20. Using the wrong type of oil can damage the engine and reduce fuel efficiency.
To change the oil in your 2017 Ford Explorer, you will need the following tools and materials:
1. A new oil filter
2. 5.7 quarts of 5W-30 or 5W-20 synthetic oil
3. An oil filter wrench
4. A drain pan
5. A funnel
6. A rag or paper towels
7. A socket set (for removing the oil drain plug)
Before you begin, ensure your vehicle is parked on a level surface and the engine is turned off. Here’s a step-by-step guide on how to change the oil in your 2017 Ford Explorer:
1. Locate the oil drain plug on the bottom of the engine and place a drain pan underneath it.
2. Use the socket set to remove the oil drain plug and let the oil drain completely into the pan.
3. After the oil has drained, replace the drain plug and tighten it securely.
4. Locate the oil filter and use the oil filter wrench to remove it.
5. Clean the area around the oil filter and apply a small amount of new oil to the rubber gasket on the new filter.
6. Install the new oil filter and tighten it by hand, then use the oil filter wrench to tighten it further.
7. Using a funnel, pour the 5.7 quarts of new oil into the engine’s oil filter housing.
8. Once the oil level reaches the appropriate mark on the dipstick, remove the funnel and replace the oil cap.
9. Start the engine and let it run for a few minutes to circulate the new oil through the engine.
10. Turn off the engine and check the oil level again. If necessary, add more oil to bring it to the correct level.
11. Dispose of the old oil and filter properly, following local regulations.
By regularly changing the oil in your 2017 Ford Explorer and using the correct type of oil, you can help ensure that your vehicle maintains its performance and longevity. Remember, how many quarts does a 2017 Ford Explorer take? Approximately 5.7 quarts, and it’s essential to keep your engine well-lubricated to avoid costly repairs down the road.
